Ismael,

Thanks.  Yes, I have done that and maybe I'm not familiar enough with the inner workings, but I want to be able to send PTT and COR signals out of band over SIP.

-Mike


On Fri, Jan 9, 2015 at 9:41 AM, Ismael Isuani <ismaelisuani@gmail.com> wrote:
Mike,

You can send * dtmf to key and # dtmf to unkey.

extensions.conf

exten => 1001,1,Rpt(1001|S)
same => n,Hangup()

from you SIP client dial 1001 and then press * and #.

I use my cell with zoiper app and works perfectly.

that's what you need?

Ismael


2015-01-09 13:11 GMT-03:00 Mike M <kf7mbk@w7ara.net>:
Has anyone every looked into getting COR and PTT signaling through a
SIP transport?

If not, can anyone give a very high level overview of what mods would
be required to do so?


Regards,
Mike Montalvo, KF7MBK
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.