I seem to remember using my 8900 for a link once and found that the COS output was exactly that, simply an output from the carrier squelch.

What I am saying is that the COS output is not subject to CTCSS, so even if the tone decoder in the 8900 is set up for decode, the COS line still just follows the carrier squelch.

Matt

G4RKY

Currently in Alcaniz!

On 24 June 2012 16:04, (KP4TR)Ramon Gonzalez <kp4tr.ramon@gmail.com> wrote:

The wiring is same as Kenwood TM-D700 and Icom IC880H (i have used both radios with same cable wiring as Yaesu 8800)

Go to page 10:  http://www.yaesu.com/downloadFile.cfm?FileID=754&FileCatID=150&FileName=FT%2D8900R%5FSpanish.pdf&FileContentType=application%2Fpdf

If using URI FOB and COS from radio, use carrierfrom=usb

Make your own cable, or order at http://uricables.com/Yaesu-FT8800R.html

On 6/24/2012 5:08 AM, ea8ee wrote:

Any info about the wiring to minidin 6pind yaesu ?

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users