If it is in mix mode rather than voter mode then RSSI has no meaning.  If the signal opens the squelch it will mix in with the best voted node.  It is not intended to listen on the same frequency since it has no GPS timing to align the audio samples with the other nodes.  

On Tue, Jan 9, 2018 at 7:22 PM, Kevin Babich <kevin.babich@gmail.com> wrote:

Hello,

 

I have an RTCM operational as a Mix-station in an environment with other RTCM’s in voting configuration.  The Mix-station RSSI does not appear to represent the actual signal level as a very binary 0 or 255 value is displayed, irrespective of signal level.

 

I understand a fix for this has been made.  As such, can someone please direct me to the location which I might locate it?

 

Best,

 

KJB

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.