I tried both Chan USB and Simple USB with both having the same. I'll double check the log files but didn't see anything in there when I checked.

Keith Dobbins
Sr. IT Systems Engineer
Managed File Transfer/Mainframe Networks
3402 Linden Street Parkersburg, WV 26104-1608  
 Amateur Radio Call Sign: N8KLD


On Tuesday, December 26, 2017, 11:40:18 AM EST, Steve Zingman <szingman@msgstor.com> wrote:


Which channel driver are you using?
Anything in the log?

73, Steve N4IRS

On 12/26/2017 11:30 AM, Keith Dobbins wrote:
I had my node working under ACID till a hard drive decided to crash on me. I did the re-install with the 32 bit DIAL install. Everything about the node appears to function properly but from asterisk to my URI I get ZERO audio in or out. It's the only audio adapter, and the URIDIAG with the loopback plug tests fine. It will activate the TX and I get the blinking green led but no audio in or out. Is there somewhere I can look to troubleshoot this issue? The motherboard is an older atom 330 board. Should I fall back to the older ACID install for this node which had worked.

Thanks for any guidance that you can provide.
Keith Dobbins N8KLD


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.