Hello all. New user here trying to get up to speed.

I connected a DMK URI to our Asterisk running ACID.

We configured it as follows:

----------usbradio.conf-------------

[general]

[usb]

hdwtype=0     

rxboost=1        

rxctcssrelax=1

rxctcssfreqs=100.0   

carrierfrom=usb     

ctcssfrom=usb        

rxdemod=flat          

txprelim=yes           

txlimonly=yes          

txtoctype=notone      

txmixa=voice   

txmixb=no        

invertptt=0       

duplex=1           

------------------rpt.conf--------------

[1444]

rxchannel=Radio/usb     

erxgain=-3                           

etxgain=3                              

controlstates=controlstates               

functions=functions                  

phone_functions=functions              

link_functions=functions              

telemetry=telemetry                    

wait_times=wait-times                

context=radio-usb                  

callerid="WB2ERS" <0000000000>     

idrecording = |WB2ERS                     

accountcode=RADIO                      

hangtime=1000                          

althangtime=4000                       

totime=170000                          

idtime=540000                

politeid=30000                

idtalkover=|iid                        

nounkeyct=1                           

duplex=1

----------extensions.conf----------

[radio-usb]

exten => 1444,1,Ringing

exten => 1444,n,Wait(3)

exten => 1444,n,Answer

exten => 1444,n,Rpt(1444|X)

exten => 1444,n,Hangup

-------------iax.conf--------------

[IAXURI]

type=user

context=radio-usb

auth=md5

secret=mysecret

host=dynamic

disallow=all

allow=gsm

notransfer=yes

callerid=IAXURI

We have one way audio and signaling from the Ethernet side to the radio side however from the radio to the Asterisk, nothing.

I verified that CTCSS detect (pin 7) goes from 5v to 0v upon receive signal .

I have the receiver audio connected to pin 22 Left_Out.

Any ideas?

Mark DuMoulin

WB2ERS

Wb2ers@metcom.com

C 800-410-3130