I have a box of those, none of the buttons function with Allstar. They are great for how I use them.
I use the 2nd audio channel to send pl tone, the rectify and filter that to drive a transistor for PTT.
COR is done via Allstar DSP.

Sent from Yahoo Mail on Android


From: Eric Guth <eric@efratnetworks.com>;
To: app_rpt-users@ohnosec.org <app_rpt-users@ohnosec.org>;
Subject: Re: [App_rpt-users] USB FOB options
Sent: Sat, Mar 22, 2014 6:54:18 PM

I just received 8 of the "blob fobs" for  $.99 each.  Is there anyone working on assigning the PTT to one of the LEDs on the fob?

 

73,

 

Eric

4Z1UG / WA6IGR

Allstar Node: 28422

 

 

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Wright
Sent: Saturday, March 08, 2014 5:32 AM
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] USB FOB options

 

Ok I can confirm that de-blobbing this CM119 chip is a no-go.  Heat gun removed the blob no worries, but removed (or destroyed) everything else as well.  Might be a good option if you wanted to desolder the entire board which it did famously, but removing the blob also removed the chip and after that of course the computer wouldn't recognise the device.  $3.50 down the flusher, oh well!

 

Steve

 

--

Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers

+64 21 040 5067