Bryan,
Do you get the crash when you start dahdi or when you modprobe pciradio?
Steve
On 1/27/2015 9:51 AM, app_rpt-users-request@ohnosec.org wrote:
Message: 2
Date: Tue, 27 Jan 2015 03:38:27 -0500
From: Bryan Fields<Bryan@bryanfields.net>
To:"app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] compile on debian (was More than 4 nodes
on a PC)
Message-ID:<54C74E83.60203@bryanfields.net>
Content-Type: text/plain; charset=ISO-8859-1
On 1/27/15, 1:04 AM, Doug Crompton wrote:
Bryan,
Yes you will need Dahdi source. You need to remove Zaptel stuff. I would
suggest getting it from the BBB image at hamvoip.org. It already has the
Allstar patches in it. It is located in
/usr/src/utils/dahdi-linux-complete-2.9.1.1+2.9.1 If not you need to
download that version of the code from Digium and apply the patches from the
Allstar svn site.
I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1+2.10.0.1) and
applied the patches from ohnosec svn. hunk 3 on patch 2 needed to be applied
by hand, the rest went fine.
Dahdi is compiled and installed.
I have the ohnosec svn asterisk compiled as well. Copied the sounds in place
and started to configure asterisk.
I've run into a bit of a problem while loading the
pciradio module however.
I don't know enough about kernel coding in linux to know where to begin
debugging this.
does your version of dahdi on the hamvoip.org site work ok? perhaps it's new
bug in the Digium code, and I should go with yours in place of it.