Bob,

Do you have a reason to run uridiag? Do you suspect your uri is bad? If not there is no reason to run it. Perhaps app_rpt is running also? You would need to run that exclusively. Stop asterisk or reboot without starting it before running uridiag. You would need to make up the test cable as per the DMK site to test it.

the snd-pcm-oss modules needs to be loaded. It creates /dev/dsp, /dev/mixer

modprobe snd-pcm-oss to load

lsmod to check if it is loaded - or ls /dev/dsp - is should be there.

73 Doug
WA3DSP
http://www.crompton.com/hamradio

From: kk6ecm@gmail.com
To: app_rpt-users@ohnosec.org
Date: Mon, 14 Apr 2014 20:29:42 -0700
Subject: [App_rpt-users] /dev/dsp

Any ideas how to solve this one?

# uridiag

URIDiag, diagnostic program for the DMK Engineering URI

USB Radio Interface, version 0.8, 04/26/11

Found CM108AH USB Radio Interface at 002/003

Unable to re-open DSP device 1: /dev/dsp1

Segmentation fault

Do I need a loopback?

Thanks,

Bob

kk6ecm

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.