[Jul 7 19:10:08] WARNING[8463] acl.c: is not a valid IP
[Jul 7 19:10:08] WARNING[8463] app_followme.c: No follow me config file (followme.conf), so no follow me
[Jul 7 19:10:08] NOTICE[8463] app_queue.c: No call queueing config file (queues.conf), so no call queues
[Jul 7 19:10:08] WARNING[8463] cdr_csv.c: unable to load config: cdr.conf
[Jul 7 19:10:08] NOTICE[8463] chan_agent.c: No agent configuration found -- agent support disabled
[Jul 7 19:10:08] NOTICE[8463] pbx_ael.c: Starting AEL load process.
[Jul 7 19:10:08] NOTICE[8463] pbx_ael.c: AEL load process: calculated config file name '/etc/asterisk/extensions.ael'.
[Jul 7 19:10:08] NOTICE[8463] pbx_ael.c: File /etc/asterisk/extensions.ael not found; AEL declining load
[Jul 7 19:10:08] NOTICE[8488] app_rpt.c: Normal Repeater Init 40764
[Jul 7 19:10:08] WARNING[8493] chan_usbradio.c: Loaded parameters from usbradio_tune_usb40764.conf for device usb40764 .
73
KDØWHB
Yes. I’m using
...
power=5
height=1
gain=3
dir=0
server1=server1.echolink.org
server2=servers.echolink.org
server3=nawest.echolink.org
server4=backup.echolink.org
#includeifexists custom/echolink.conf
It may only use the first three... don’t know.
From: Skyler Fennell [mailto:electricity440@gmail.com]
Sent: Wednesday, July 02, 2014 11:33 AM
To: Bob; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Error 1
Do I select the server on the echolink conf file?
On Jul 2, 2014, at 8:47 AM, "Bob" <kk6ecm@gmail.com> wrote:I’ve had trouble with server2 for echolink. Recommend deleting and select another from the list.
Bob
kk6ecm
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Skyler F
Sent: Wednesday, July 02, 2014 7:29 AM
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Error 1
I guess it didn't remember the stuff from yesterday, this is all it had today
[Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40764
[Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40930
[Jul 2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
[Jul 2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
[Jul 2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
[Jul 2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
[Jul 2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
[Jul 2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
[Jul 2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
[Jul 2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm@gmail.com> wrote:
For sure Asterisk is not happy. A shot... sounds like the computer lost your URI/FOB USB address when it lost power. Need to reset using lsusb to identify address and reset devstr= parameters in the USB tune file. I’ve also had this problem when the network settings are not correct, but would bet on the devstr perameters.
Bob
kk6ecm
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Skyler F
Sent: Tuesday, July 01, 2014 4:15 PM
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Error 1
I know it is probably on the archive a lot of places, but I am experiencing Error 1 sometimes.
It is sometimes right off the bat when I reboot the system, sometimes not. I had it before, and I decided to reinstall from scratch.
Is there anything i can do about this? The only thing I could think that may have led to this is the power cord accidentally coming loose once when the computer was on.
Asteriscks died with error code 1
Automatically restarting
Asteriscks died with error code 1
Automatically restarting
Asteriscks died with error code 1
Automatically restarting
ETC........................
Thnks for any help.
--