For those codes to work you must add these lines in your rpt.conf file:

So use the following:

950=ilink,7                             ; Node which last transmitted to us
951=ilink,11                            ; Specific Link permanent connect - Disconnect
952=ilink,12                            ; Specific Link permanent connect - monitor only
953=ilink,13                            ; Specific Link permanent connect - transceive
954=ilink,6                             ; Disconnect all links including permalinks

The above linking will connect reconnect if there is a drop in the network. It will reconnect quietly.

Then reload rpt.conf  or stop asterisk and then restart asterisk so the changes will take effect. Then try them out.

*951node will link your node to the node specified. It will keep it connected. If your internet gets too slow or goes out it will automatically reconnect as soon as it possibly can.

Note: if you use the Perm connect command (*953node) you must use the Perm disconnect command (*951node) to break the link or *954.

The use of * 10 or *1node will not break this link. These commands only work on nodes connected with *3node.

Jon VA3RQ



On 2/26/2012 12:17 AM, Jim W7RY wrote:
Those commands don't work. Any idea why?  *3 node works just fine.
 
73
Jim W7RY
 

From: David KE6UPI
Sent: Saturday, February 25, 2012 1:02 PM
To: Jim W7RY
Cc: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Connection Timer?

*953 is to connect
*951 is to disconnect

On Sat, Feb 25, 2012 at 8:28 AM, Jim W7RY <w7ry@centurytel.net> wrote:
Or will *953 node be better...
 
 
I wish answers would be more clear on here for us un-experienced users. (The same goes for the documentation)... Smile emoticon
 
Thanks
73
Jim W7RY
 

Sent: Saturday, February 25, 2012 7:43 AM
Subject: Re: [App_rpt-users] Connection Timer?

Jim, No there is no timer. But if one of the nodes loses the Internet then it will drop out with the uses of *3node. The only timer is one the remote base nodes.

So use the following:

950=ilink,7                             ; Node which last transmitted to us
951=ilink,11                            ; Specific Link permanent connect - Disconnect
952=ilink,12                            ; Specific Link permanent connect - monitor only
953=ilink,13                            ; Specific Link permanent connect - transceive
954=ilink,6                             ; Disconnect all links including permalinks

The above linking will connect reconnect if there is a drop in the network. It will reconnect quietly.

David

i.e.
*950node



On Fri, Feb 24, 2012 at 10:15 PM, Jim W7RY <w7ry@centurytel.net> wrote:
Is there a connection timer hiding somewhere in my node?  I'm having issues staying connected to the Win System node 2560.
 
If so, can someone please point me to it?
 
Thanks
73
Jim W7RY
 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4829 - Release Date: 02/24/12


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4831 - Release Date: 02/25/12



_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users