Kevin & Mike,

Did I miss another response somewhere?

It appears to me Mark has the noload=chan_usbradio.so commented out so shouldn't it load automatically upon reboot of the system?
As a suggestion I would then stop the loading of chan_simpleusb.so to avoid any conflicts.

My other question is how has he configured USB and does it match the same port each time the device is plugged in.

Larry - N7FM

; Module Loader configuration file
;

[modules]
autoload=yes
;noload=chan_voter.so
;noload=chan_usbradio.so
;noload=chan_irlp.so
;noload=chan_echolink.so
;noload=chan_simpleusb.so
noload=app_hamvoip.so

;noload=res_crypto.so
;noload=func_callerid.so
noload=chan_oss.so
noload=chan_alsa.so
noload=chan_phone.so

On 1/1/19 9:33 AM, Kevin Custer wrote:

In looking at your config (quickly) it looks like you aren't loading chan usb in the modules.

Kevin

On 1/1/2019 12:25 PM, Mark DuMoulin wrote:

Kevin,

I downloaded ASL 1.01 and had the same issue as with the RC.19
When I try to use it asterisk fails claiming to not find the chan.

I'll put it back in and try again to give you feedback.

Tnx!
Mark

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.