Hm..

This is a function that works just fine for me and I never had to set it up.  The bug that I was told that there’s not a solution to is that if there's a keyup in progress and it comes time for the ID, it uses voice I'd instead of Morse. If the network transmission comes during the voice, it reverts to Morse.

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Joe Moskalski
Sent: Wednesday, August 17, 2016 12:48 PM
To: app_rpt mailing list <App_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Switch to CW ID upon key up

I was wondering if anyone has found a good clean way to cause the voice ID to switch to a CW when someone keys up on a system operating in a repeater configuration. This is something most hardware controllers do and its a function I would like to try to implement. I figured I would ask here before trying to re-invent the wheel. Ideally, it would switch to a CW ID when a local station would key into the system and also when a remote connection would key up as well.