yea!!!!!!

And there was much rejoicing!!! Thanks for letting me know. JIM

From: kb2ear@kb2ear.net
To: telesistant@hotmail.com; dg8ngn@googlemail.com; app_rpt-users@qrvc.com
Subject: Re: [App_rpt-users] non-USA-standard repeater offset for freq-agileradios
Date: Thu, 25 Mar 2010 23:26:09 -0400

It would appear to work on the TM-271a

Thanks,

Scott KB2EAR

----- Original Message -----

From: Jim Duuuude

To: dg8ngn@googlemail.com ; app_rpt mailing list

Sent: Thursday, March 25, 2010 8:06 PM

Subject: [App_rpt-users] non-USA-standard repeater offset for freq-agileradios

I have added (still experimental) code in app_rpt version 0.211 (available this
evening in SVN) to attempt to support non-USA-standard repeater offsets
for frequency agile radios. I have tested the code on a TMG-707A, but not
on any of the other models supported, which are TM-271, TM-D700, FT-897
and IC-706. The other radios did not seem to support such functionality.

There are 2 ways of configuring this:

the new rpt.conf parameters (that go into the node clause
in rpt.conf), are split2m and split70cm, which specify the
default offset for 2 meters and 70 centimeters in kilohertz.

split2m = 600
split70cm = 5000

You may also specify the offset in a memory channel
by adding an additional parameter before the options,
for example:

01 = 147.435,103.5,1035,h-t ; This would be for W6NUT in Los Angeles with input of 146.40

JIM WB6NIL

_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users