Robert,
Te stop hearing remote telemetry you just need to disable it.
Add these lines to your rpt.conf under the functions stanza.
[functions] it may read [functions28183]
901=cop,33 ; Local telemetry output enabled
902=cop,34 ; Local telemetry output disabled
903=cop,35 ; Local telemetry output timed Remote (when anybody connects/disconnects from xxxxx Only)
You can also put that into your startup script to stop it from ever happening.
[28183]
startup_macro=*903#
rxchannel = Radio/usb28183 ; Rx audio/ signaling channel
If you ever want to re-enable it, just do a *901
Thank you,
Fred McLean
AllStar 29503
832-948-5200
If you think about that, others telemetry is important to know if you are going to be connected to them. Otherwise, you could interfere with pending operations.