Noah,

 

Does your radio have an auxiliary connector where you could connect the URI to leave your RJ45 connector free to use with the microphone?    Alternatively, you might consider installing iaxRpt on one of your PC’s that will give you a desktop dispatch application type access to the radio over via the URI over your LAN.  I do that here and it works great. 

 

Bill, WA8WG

   

 

From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Noah Chalker
Sent: Wednesday, August 8, 2018 7:21 PM
To: App_rpt-users@lists.allstarlink.org
Subject: [App_rpt-users] Using a handmic while using a URI

 

Hey folks,

 

I am still planning out the setup for my node. One issue that came up is that of microphones. With the URI, I will have to connect it to the microphone jack of the radio using a RJ45 and to the speaker output. The speaker problem can be easily solved with a splitter. As far as the mic goes, I am a bit confused. If the URI is plugged into the mic port, I obviously cannot use the radio with a hand mic. Is there a way that I can simultaneously use the radio with a RJ45 mic connector at the same time that the URI is connected?

 

KE5VQL

 

Noah

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.