Or you could just set up a single node with a radio, and setup all the "console" operators with IAX Rpt and connect them all to the node. They will all be able key that node and all will be able to monitor RX traffic.

Jon VA3RQ

On 8/28/2012 9:15 AM, Ken wrote:
The usual way to do this would be to have two nodes and link them.
The second node would not have any hardware configured (it would use a so-called psuedo channel)
GL
Ken

-----Original Message-----
From: Brett Friermood <brett.friermood@gmail.com>
To: app_rpt-users <app_rpt-users@ohnosec.org>
Sent: Mon, Aug 27, 2012 9:29 pm
Subject: [App_rpt-users] Multiple nodes through one radio connection

A hypothetical question:

Can a radio port, either URI or Piconode, be set up to have the
receive side be associated to one node, while the transmit side is
associated with another? I believe a single node can have separate
receive and transmit ports. But can a single port service two nodes,
one transmit-only and the other receive only?

This is part of some brainstorming for a multi-operator multi-radio
console setup.

Thanks,
Brett KQ9N
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users