Hey bob

Where are you injecting the audio? There should be plenty of headroom. Is the mic still connected?

Ross

Sent: Thursday, August 15, 2013 8:12 PM

Subject: [App_rpt-users] Mastr II and URI low TX audio

I have a Mastr II mobile tuned up in the ham bands. Trying to set the audio levels. RX worked great. Problem with TX audio, I can only get 2KHz deviation max if I set the level to 999 in app_rpt. I am using the URI and have wired it to use the 6db amplifier on board. Anyone else run into this problem?

boB - W5EVH

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users