I am using the RPi2-3 image on a Pi3 and the RB-USB-RIM.  I would like to set Channel B to output a PL tone of 110.9 Hz.  In SimpleUSB, I have set txmixb=tone.

I have set the level to 500.  Using an oscilloscope, I see no output from Channel B.  Where do I set the frequency and how do I enable it?

 

Tnx

Steve

N8AR

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic