I should have said "than" and not "from".... Sorry !
My allstar shows up nearly instantly but my echonode take up to 10 min sometimes.

Sometimes the server load slows things down !

Sometimes changing the servers used changes listing time  I have found.
I'm not saying anything is so or not so but I see what I see at my end of things.

Anyway, would like to know what you find out for future ref if you get it cleared up.
I would change servers for a test.

...mike/kb8jnm
-------- Original Message --------
Subject: Re: [App_rpt-users] Allstar connecting to Echolink?
From: "Bryan D. Boyle" <bdboyle@bdboyle.com>
Date: Sun, March 02, 2014 8:00 pm
To: app_rpt-users@ohnosec.org

On 3/2/2014 7:23 PM, mike@midnighteng.com wrote:
>
> I could be wrong but I think it takes a bit more time for the data to propagate
> to echolink from allstar.

The two have nothing to do with each other. Takes about a half hour for
you to register with allstar and for the leaf nodes to pull the
registration file down. Remember, allstar is a distributed peer-to-peer
network architecture (in many ways) on the back end, not a top-down
central management system (such as Echo and Cameron's old technology
systems)

Echolink is almost instantaneous; since all echo systems have to
authenticate to the mothership, once it shows up in the echo database,
it's assumed that it's available and users can thus connect.

Different authentication model. If the Allstar mother ship goes tango
uniform, the leaf nodes can still operate. If the same happens to the
Echolink servers, you're SOL.

> I think you really have two registrations going on. Echo after the allstar.
>
> Perhaps wait a bit longer ?

If you're in the active nodes list on allstar, you've successfully
registered. Like I said, wait a half hour and try again.

(Me? I have echolink going to a 'dummy load' node; registered just to
say I have it, not to use it. Cuts down on being bothered by drive by
lids with a computer system, cheap headset/mic combo, and badly adjusted
audio).

Bryan WB0YLE

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.