Thanks Mike,    I was trying to know if I can obtain this information for another station (other than my own)  on the node list.  
Say for example I want to use the iaxRpt client on my computer to connect to a node far way like one of the Alaska nodes, is there a way to discover the settings for that station to create an account is iaxRpt ?

Thanks for any help on this.  -Dan KM6HK


On Nov 25, 2015, at 10:25 AM, mike@midnighteng.com wrote:


Hostname = local ip or host name

User & pass = whatever you set-up in iax.conf
ex:

[gui]
type=user
context=radio-gui  ;user
username=gui
auth=md5
secret=PASS       ;pass
host=dynamic
disallow=all
allow=gsm
notransfer=yes


Hope it helped a little.

...mike/kb8jnm


I am not a guru on AllStar so need help on the obvious:

How do I obtain the following information for any given node on the system for
configuration of iaxRpt client? :


For iaxRpt I need:

       1;)  How do I obtain the IP address for any given node on the system?
2.) The host is IPaddress, right ?
3.) Username for that system
4.) Password for that system

For example, I am trying to configure iaxRp client t and need to know the
information and the host / username / password

From my own system I can get this dump:
Can I get this from any given user on the system -or-
Can I assume that  “allstar-public” with password of “allstar” is
universally installed ??


KM6HK*CLI> iax2 show users
Username         Secret                Authen           Def.Context      A/C
Codec Pref
gui              dan94025              000000000000002  radio-gui        No
Host
allstar-public   allstar               000000000000002  allstar-public   No
Host
allstar-sys      Key: allstar          000000000000004  allstar-sys      No
Host
radio            -no secret-           000000000000003  radio-secure     No
Host




_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
bottom of the page. Enter your email address and press the "Unsubscribe or edit
options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If
you have trouble unsubscribing, please send a message to the list detailing the
problem.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.