Thanks for the replies. It seems Linux sees the CM108 FOB, but it's like AllStar isn't communicating with it. Is there a setting somewhere to tell it what USB bus and port to use, or does it find it automatically? I also tried to use simpleusb-tune-menu to configure it but I get the error below.
pi@raspberrypi:/usr/sbin $ ./simpleusb-tune-menu
Error parsing device parameters
pi@raspberrypi:/usr/sbin $
-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan Fields
Sent: Tuesday, December 12, 2017 3:51 PM
To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org>
Subject: Re: [App_rpt-users] Changing from radioless dahdi to simpleusb
On 12/12/17 3:42 PM, Steve Zingman wrote:
> dahdi/pseudo needs chan_dahdi.so
I stand corrected. I forgot about the pseudo driver.
--
Bryan Fields
727-409-1194 - Voice
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.