No, it doesnt entirely.

I am not going to get into an argument about this on this list. PERIOD.

Trust me, I, more then ANYONE ELSE ON THIS PLANET (for HOPEFULLY PAINFULLY
OBVIOUS reasons) am in a position (even WAAAYY more then Digium) to be able
to authortatively assess whether DAHDI is working properly, since I am the one
that determines what "properly" is for that technology.

Unless Digium somehow "magically" added those patches in some newer then 2.7
release (which is REALLY REALLY unlikely), it *REALLY* doesnt work fully properly.

Jim

From: mihhail.jakovlev@telegrupp.ee
To: telesistant@hotmail.com; doug@crompton.com; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Debian Wheezy and RPi update
Date: Sun, 23 Mar 2014 22:22:03 +0000

Autopatch works fine!

ES1BIS

Tervitades,
Mihhail Jakovlev

Sent from mobile phone
Îò: Jim Duuuude
Îòïðàâëåíî: ìàðòà 23, 2014 11:04 PM
Êîìó: Doug Crompton, app_rpt mailing list
Òåìà: Re: [App_rpt-users] Debian Wheezy and RPi update


Try using all of the features (autopatch, etc). It *REALLY* doesnt!!


From: doug@crompton.com
To: app_rpt-users@ohnosec.org
Date: Sun, 23 Mar 2014 16:54:27 -0400
Subject: Re: [App_rpt-users] Debian Wheezy and RPi update

I am using dahdi-linux-complete-2.9.0+2.9.0.1 and it works for me using simpleusb. What should I be looking for that doesn't work? I have been using this on all my RPi compiles and now Debian PC.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: w4rfj@comcast.net
To: telesistant@hotmail.com; doug@crompton.com
CC: app_rpt-users@ohnosec.org
Subject: RE: [App_rpt-users] Debian Wheezy and RPi update
Date: Sun, 23 Mar 2014 16:18:30 -0400

Hi Jim Dude!!

 

Nice to see your reply…  ;-)

 

I am behind the 8 ball here as I need to catch up with this RPi thingy!  I just picked one up to play with and as you may already know I have my Beagle board set up as a repeater (On the bench as I type this…). I am looking to make an enclosure for it!

 

I am finding out that there are some neat gadgets out there available for us play with… 

 

By The way…  I graduated College last July and will be more active now that I only have one job to worry about!  Thanks for all your help with allstar! (Been a While since we have chatted).

 

Best 73

 

Roger W4RFJ

 

From: Jim Duuuude [mailto:telesistant@hotmail.com]
Sent: Sunday, March 23, 2014 4:05 PM
To: Doug Crompton; Roger Jordan
Cc: app_rpt mailing list
Subject: RE: [App_rpt-users] Debian Wheezy and RPi update

 

Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!!

There are a couple of patches that are necessary, one still in "evaluation".

Jim

From: doug@crompton.com
To: w4rfj@comcast.net
Date: Sun, 23 Mar 2014 16:03:47 -0400
CC: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Debian Wheezy and RPi update

Roger,

 Everyone has the capability to compile!

I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task.

If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list:

1. Have a PC and drive you can dedicate
2. Download the Debian net installation CD (you can do this in windows)
3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet)
4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc.
5. Download the kernel header files and other dependencies needed for compiling
6. Get DAHDI complete source and compile and install
7. Get asterisk/allstar source and compile and install
8. Copy over or create and configure the /etc/asterisk configuration files

Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience.

I would be glad to answer any questions anyone might have along the way.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.