Steve,
The CM108/CM119 is nowhere near dead! Even if CM stops manufacture, there
will be decent "clones" of it for years to come. No worries about that!
If you're needing some FOBs, I understand the shipping issues you've got,
being in NZ. I just checked the US Postal Service shipping site and a
"First Class Mail International Large Envelope" is under $20USD for 2
lbs., shipped from the USA to NZ. Priority mail, where you could ship a
small box in under a week, starts at about $64USD. See:
https://ircalc.usps.com/?country=10324Why not just work a "bulk quantity" deal with Kevin or Scott to sell you
and ship you a hand full of their RIM-lite adapters??? Then, you'll in
good shape for now.
http://www.repeater-builder.com/products/usb-rim-lite.html73, David KB4FXC
On Wed, 6 Jul 2016, Steve Wright wrote:
> On 06/07/16 11:44, Kevin Custer wrote:
> > Soldering a 48 pin LQFP and having it be fake is nothing short of a
> > bad experience. Like Scott, I recently purchased a fair quantity of
> > CM119A's from a top CM distributor. They told us the CM119 and CM119A
> > are now legacy products and the CM119B is current. Unfortunately, the
> > B model doesn't use a crystal and several developers agree that they
> > may not be suitable for digital and analog radio adapter
> > applications. There were still a few hundred CM119A's in the
> > distribution chain as of a few months ago.
>
> If the CM119 is dead, then we should scrap it. I can't really see why
> we are focussing on that devices' built-in I/O, when we have computing
> devices such as RPI3 with scads of easily accessible I/O.
>
> Linux sound is really well developed - "just works everywhere" I'd say.
> Why not build or reuse a DSP-based driver for that, that will handle
> voting - now we are in business with all the toys, for the foreseeable
> future. Likely a simple CLI config tool could be developed too - choose
> RX audio device, TX audio device, signalling, save settings, done.
> Rinse and repeat for three devices.
>
> Hardware VOTERs are fine for a single repeater with a few outboard
> receivers, but way too much money for non-millionaire clubs to convert
> "everything" to asterisk - they will stick with their IRLP node for
> sure, and that is a tragedy.. I see a few members here and elsewhere
> make it their business to put tens of thousands of $$ into communication
> systems, and that's enviable and laudable, but 90% of constructors don't
> exist on that rarefied plane.
>
>
> S
>
> _______________________________________________
> App_rpt-users mailing list
>
App_rpt-users@ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.