Tim,

I run PFSense with many of my Allstar nodes. I have to set STATIC outbound NAT for the specific IP addresses that are Asterisk. This will cause them to not pick random ports outbound.

I am not sure what iax2 show registry does, but I could not get it to work until I put in a static NAT outbound.

Here is a copy of my outbound NAT statement for one of my nodes:

WAN

172.16.12.22/32

udp/4569

WAN address

YES

I believe the key is the last YES, which is the STATIC PORT heading.

Hope that helps,

Mike

kb8zgl

From: Tim Sawyer <tim.sawyer@mac.com>
Date: Friday, August 22, 2014 at 10:52 AM
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] pfsense router?

Is anyone using a pfsense router in your Asterisk network? While app_rpt seems to work fine it shows a weird port, not 4569, with “iax2 show registry”. I assume pfsense is doing something weird with NAT that I don’t understand. Can anyone shed some light on this subject?

Tim WD6AWP

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.