I see you online and registered. I, however, was not able to connect to you. Perhaps port forwarding or config of the port is wrong.

CLI is where you can access the node via SSH. Command Line Interface

I can jump on TeamViewer if you have it, to help you out if ya want. Just email me directly off the list for the info.

On Fri, Jan 11, 2019 at 4:36 PM AD2TM <ka2myd@frontiernet.net> wrote:

Hello All;
For the past year at different time I have been trying to get an allstar node up and running. I have had various amounts of success. I too wish that there was a detailed step by step setup instruction list for us newbies, or a script that would walk a new user through the COMPLETE setup. I have found the documentation very frustrating to follow. Enough complaining.

I have many questions, but will only as a couple:
1.) What is the CLI and what is it used for?
2.) I know my node, #47788 is registered, but no information can be found. Where how do I fix th

Can someone try to connect and let me know their results? There is a radio connected and on, but on a simplex frequency.
73
Tom AD2TM
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.