Yep, there’s a really good way to do that. Add a 989=cop,4 to your [functions] stanza. Then you can do *989 and it will make a test tone for as long as you want. Press # to stop when you’re done.

--
Tim WD6AWP

On Aug 30, 2014, at 7:43 PM, Skyler F <electricity440@gmail.com> wrote:

HI,

I want to do some testing with a service moniter on TX by sending a 3khz tone. The problem about the one on the radio tune menu is that they are too short pulses. Is there anything a bit slower/longer tone that I could use like a sound file or something?

Thanks,

73,

Skyler , KDØWHB

--
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.