What is the difference between ALLSTAR PI 3 efforts in the US
and the UK?
There is a recompiled PI 3 version at the UK ALLSTAR site. I
was looking at that until I read it does not yet support
built-in WiFi.
KB9WKR
Bill Bussell
Sent from my iPad
On 3/21/2016 10:31 PM, Ryan Schultz wrote:
The PI 3 has a 64-bit processor
and the old PI 2 was only 32-bit, so you may run into
issues.
My friend who is the 3d printing community posted that
his software (octoprint) does not run on the Pi3 unless you
upgrade to the latest Debian Kernel. I expect you will have
the same problem with other software too.
Geoff.
--
Geoffrey S. Mendelson 4X1GM/N3OWJ
Jerusalem Israel.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
and scroll down to the bottom of the page. Enter your email
address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it
via email confirmation. If you have trouble unsubscribing,
please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.