kdw0hbI figured out the problem : Even though I was hooking my audio directly into the mic input of the CM108 chip, a low pass filter was clamping all the high frequency signals to ground, I just had to desolder an L5 as this link shows:I was looking at other guides, which had sound fobs with no low pass filter already in it.
http://m3h.com/usbfob-119.pdf--On Tue, May 3, 2016 at 8:34 AM, Skyler F <electricity440@gmail.com> wrote:I just put together a modified sound fob by taking a 10µF capacitor to the divider of 47k and 68k resistors and then to the microphone input of the sound fob, but I am getting the lack of high frequency noise error when I plug my fob into the radio. A DMK URI works fine. Has anybody else had problems with these sound fobs?73kd0whb
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.