Do want to stop AllStar/Asterisk or just turn the repeater off? There is a COP command for the latter. I'm not in front of a terminal to get you the command.
tnx
Mike / W5JR
Alpharetta GAOn May 26, 2017, at 11:46 AM, Bob Pyke <k6ecm1@gmail.com> wrote:Hmmm... sounds like an update is in order :-)Thanks much,BobSent from my iPhoneOn May 26, 2017, at 8:41 AM, Steve Zingman <szingman@msgstor.com> wrote:OK,/etc/init.d/asterisk stop <--- Stop asteriskkillall -9 asterisk <---------------- Make sure it's deadps ax | grep asterisk <--- Check to see if it's really dead/etc/init.d/asterisk start <--- start asteriskps ax | grep asterisk <--- Check to see if it's really startedThe newer release candidate fixes this.73, Steve N4IRSOn 5/26/2017 11:37 AM, Bob Pyke wrote:No. It will be off for several minutes, but I want it to stop when commanded, and start on command. We are conducting an exercise. I don't know the version, and logging into the node does not say. We've been operating, pretty much since the introduction of app_rpt on the RPiThanksSent from my iPhoneOn May 26, 2017, at 8:31 AM, Steve Zingman <szingman@msgstor.com> wrote:Bob,Are you talking about "bouncing" asterisk? A stop followed by a rapid start? Which distribution and version are you running?73, Steve N4IRSOn 5/26/2017 11:28 AM, Bob Pyke wrote:I have a need to temporarily disable the repeater, then enable it. Timing is critical, so a delay is undesirable. What is the best way to accomplish this? I will be logged into the node.Thanks,BobSent from my iPhone_______________________________________________App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"You do not need a password to unsubscribe, you can do it via email confirmation. If y