20wpm applies to Part 97 only.Part 90.425(b)(2) states "The Morse code transmission rate shall be maintained between 20 and 25 words per minute."Part 95.119(d) states "The station identification must be transmitted in: (1) Voice in the English language; or (2) International Morse code telegraphy." - note no words per minute discussed.I've heard many GMRS repeaters (Part 95) rip through at 30+ wpm.So, if the change is made and recompiled, will the CW still sound OK or more like the early PROM style MSF5000, i.e, the dot/dash ratio falls apart at a faster speed?
tnxMike / W5JRMilton GAYes. I just posted it about 2 hours ago.
20 WPM.
73
Jim W7RY
On 12/15/2013 6:33 PM, Jim Duuuude wrote:
Isnt there something in part 97 about max speed for CW id?
> Date: Sun, 15 Dec 2013 15:30:28 -0600
> From: ars.w5omr@gmail.com
> To: app_rpt-users@ohnosec.org
> Subject: Re: [App_rpt-users] Speaking of CW IDs
>
> On 12/15/2013 03:25 PM, Mike/W5JR wrote:
> > So, there is a "speed=" in the morse stanza. Does it have a governor on it to limit the speed maximum to 20 wpm? My entries greater than 20 make no difference. And why would I want faster than 20 wpm you ask, my HUB nodes are only send "ID" to web transceivers, and I would like them faster. I have observed that at 20 wpm, there is a bit of jitter and faster may not be possible. (An ID I built years ago had a limit on how fast it could go before the code elements were overrun by timing)
> >
>
> I've been meaning to ask that same question.
>
> Rules wise, since there's no CW requirement *at all* for 'any' license,
> then there shouldn't be a speed limit on how fast repeater id's should
> be limited to.
>
> I like my code speed around 30~35wpm these days. I used to copy NTS
> traffic at 40+wpm. 20wpm is such a '~*yawn*~' bore...
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users