Hi

 

I did what you suggested and it seems to complete without error.

 

However it did not resolve the problem.

 

I ran the same commands for Asterisk, still the same issue.

 

Reran the Zaptel compile / install again and still no luck.

 

I re-downloaded for the allstarlink.org the ISO for ACID in case what I downloaded originally was corrupt.

 

after reinstalling I looked at the /root/acid­install.log and I did not see anything that looked like an error.

 

Am I forgetting something or could my hardware not be combatable?

 

As part of this project I did install this successfully on a different computer.

 

Any help greatly appreciated.

 

Chris

From: Paul J. Agamata <Sysman@Xceptions.COM>
To: C B <harvard5362@yahoo.com>
Sent: Saturday, August 24, 2013 4:57 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1

Log into your 'root' account and navigate to the 'zaptel' directory.

When your in there type the following:

./configure <enter>

make <enter>

make install <enter>

Then reboot your computer and everything should be fine.

_______________________________
Paul J. Agamata

WH6FM

Sysman@Xceptions.COM
Hilo, Hawaii

From: C B <harvard5362@yahoo.com>
Reply-To: C B <harvard5362@yahoo.com>
Date: Saturday, August 24, 2013 1:54 PM
To: Paul Agamata <Sysman@Xceptions.COM>
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1

Paul

 

Please excuse my lack knowledge here, I am very unsure of the compile / install procedure you are speaking of.

 

is there anything you can refer me to that will contain instructions on how to do this?

 

Is it something I did wrong?

 

Sorry for not having a lot of experience.

 

And thank you for your help.

 

Chris

From: Paul J. Agamata <Sysman@Xceptions.COM>
To: C B <harvard5362@yahoo.com>; "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Saturday, August 24, 2013 4:46 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1

This is indicative of the zaptel drivers not in your kernel.  Compile/Install then reboot and all should be well.  The 'zaptel' directory is in the 'asterisk' source directory.

Be aware that if you update your kernel you will need to re-install the zaptel modules.

Regards,

Paul

_______________________________
Paul J. Agamata

WH6FM

Sysman@Xceptions.COM
Hilo, Hawaii

From: C B <harvard5362@yahoo.com>
Date: Saturday, August 24, 2013 1:23 PM
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Asterisk ended with exit status 1

Hi

 

I am attempting to build a ACID node.

 

After several attempts of reinstalling the ACID with the same results I am asking for some help.

 

All seems to complete normally, I download the configuration, reboot and the following error message keeps repeating.

 

mpg123: no process killed

Asterisk ended with exit status 1

Asterisk died with code 1

Automatically restarting Asterisk

 

Computer is a HPdc5700 small form factor

1 GIG memory

500 GB SATA HDD

 

than you in advance for any help

 

Chris

 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users