Be careful that if you do change the kernel, you can either install the kernel headers or know how to build them from source. You will need them for DAHDI.

73, Steve N4IRS

On 9/15/2016 10:03 AM, Loren Tedford wrote:

Warning the content listed below has not been tested..

What i would do is install DIAL: then search online how to install a low
latency kernel a basic desktop of your choice (Just to make life easier)
and virtual audio cables for linux teamspeak has a linux installation as
well.. Their are several sip phone clients available out their on the
market and you could probably setup what ever needed to link into your
allstar node.. As far as machine speed and other info well I would at
least have 2 gigs of ram at minimum and recommend at least 4 gb of ram
if you really have to use a windows program in linux look at wine.. I
don't recommend this always try to find a linux alternative.. If your
wanting to run this computer off of 12 for power fail-over and other
needs check out a pico power supply..

Best of luck I hope i have pointed you in the right direction this is
not to say you couldn't get this done with the pi but you might have
issues with locking open allstar and i guarantee you don't want that..

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.