I’m planning the same thing Monty.
I just removed the transmitter and receiver from the RC210 and put them
directly on the node. I still have the other node connected to the RC210 for
channel steering. It looks like the parallel GPIO’s would be active high
so I need to reprogram my radio. I’ll let you know if I get there before
you do.
73 de K0JSC Jeff
From: app_rpt-users-bounces@ohnosec.org
[mailto:app_rpt-users-bounces@ohnosec.org] On
Behalf Of Monty
Sent: Tuesday, July 03, 2012 4:06
PM
To:
Subject: [App_rpt-users] CDM/GM300
as Remote Base
Hello Everyone,
Has anyone used a
Motorola CDM or GM300 as a remote base and used the GPIOs to control which
channel?
Monty