Not just "could" but in fact "have to" when two (or more) nodes (private or public) are on the same public IP. 

This is also the way to get private nodes on different public IPs connectable to each other. You have to enter the public IP instead of the router NAT IP. 

tnx
Mike / W5JR
Alpharetta GA

On Jul 13, 2016, at 10:09 PM, Skyler F <electricity440@gmail.com> wrote:

Thanks, the nodes stanza trick worked. I forgot you could do that with normal nodes as well as private.

On Wed, Jul 13, 2016 at 7:44 PM, Philip Dorr <kd0ixy@judgementgaming.com> wrote:
You may need to setup hairpin NAT.  http://wiki.mikrotik.com/wiki/Hairpin_NAT

On Wed, Jul 13, 2016 at 8:35 PM, Skyler F <electricity440@gmail.com> wrote:
I have two separate boxes, one node on port 4570 and the other on 4569. They can both take inbound and outbound calls, however, they can't connect to each other. I don't know if it is the mikrotik router, or the way Mountain BB is configured, but a loopback call can not be made. 

Is there any solution to fix this without assigning private nodes? 

73
Skyler 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.




--
Skyler Fennell
KDØWHB
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.