Hi Corey,
Yea, I just thought that I could issue commands to another node
without actually connecting to it.. I would have thought there would be a way
to do this in the background (short from SSHing into the box) so you would not have
to go through the actual connect process, but the current method is just fine..
I just did not understand it for some reason at first that you had to connect.
I suppose I could create some sort of macro to login to the
boxes and perform the intended commands, just got to learn how to do all of
that when I get some time..
Thanks and 73
Lu, KA4EPS
From: Corey Dean
[mailto:n3fe@repeater.net]
Sent: Thursday, July 28, 2011 8:59 AM
To: Lu Vencl; Ken
Cc: <app_rpt-users@ohnosec.org>
Subject: RE: [App_rpt-users] Remote commands
Lu,
Not sure if you actually got everything answered but from the
command line this is how you would do it...
Lets say I am node 2337 and I want to control 2340.
First I would connect to the node rpt fun 2337 *32340
From 2337 I would issue rpt fun 2337 *42340 (THis
forces all the command sent on 2337 to forward over to 2340)
I would then get the audio file telling me it was working.
Then I would just issues commands as normal in the same fashion. Say I
wanted to connect 2340 to the Wan repeater system. I would issue
rpt fun 2337 *32135. This would be controlling node 2340. It will
continue to do so until I issue the #. (rpt fun 2337 #)
Corey N3FE
From:
app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf
Of Lu Vencl [vencl@att.net]
Sent: Wednesday, July 27, 2011 11:09 PM
To: Ken
Cc: <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Remote commands
It was my bad. I did not realize that I had to be actually
connected to the node first. I thought you could control without being
connected.
Sent from my iPhone, Lu Vencl
On Jul 27, 2011, at 9:29 PM, "Ken" <ke2n@cs.com>
wrote:
Yes – once you hear the announcement, it should work. If it is working, the machine you are talking to will stay continuously keyed up.
If the machine you are trying to command is not in the right command state (user functions disabled, for example) that would likely block you from executing anything.
Ken
PS: I replaced the recording with a much nicer sounding one J
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Neal Garbenis
Sent: Wednesday, July 27, 2011 9:24 PM
To: Lu Vencl
Cc: <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Remote commands
Lu
Yes I did have a typo sorry. Once you have control everything should work.
Neal
Sent from my iPhone
On Jul 27, 2011, at 9:15 PM, "Lu Vencl" <vencl@att.net> wrote:Neal, I think you have a typo below.. Should it not be *4XXXXXX?
That is what I have to do to get the remote command back.. Once I have control, I tried *3xxxxx to connect a node , or even *81 to force time announce, but neither work.
So I presume there is a permissions issue or something else I am doing wrong?
From: Neal Garbenis [mailto:njgarbenis@gmail.com]
Sent: Wednesday, July 27, 2011 9:08 PM
To: Lu Vencl
Cc: <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Remote commands
Lu
I am no expert but I do use the remote command often. First you need to be connected to the node that you want to control. Then dial *xxxxxx (the node you want to control). You will then hear a very overdriven audio file that says remote command. From that point on you are controlling that node you can (connect,disconnect, etc). To exit remote comand mode hit the # sign.
Hope this helps
Neal
NG8Y
Sent from my iPhone
On Jul 27, 2011, at 8:52 PM, "Lu Vencl" <vencl@att.net> wrote:Ok,
I know this is a newbie question, but I searched everywhere I know and I can’t find an example nor figure this out..
I need to understand the proper command structure or procedure of *4 remote command.
Example, I want to issue a command to one of my nodes from another node. How do I do this?
I tried the following example from my node 27870
KA4EPS-R-Margate*CLI> rpt fun 27870 *427869*81#
I thought that this command would allow me to announce the time on node 27869 while entering this on the 27870 node..
Is this not possible?
Another example, let’s say I want 27869 to connect to 27875 would I want to dial over the air on (node 27870) *427869*327875# ?
Thanks again for your help.. I am just not getting anywhere with it.
Lu, KA4EPS
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
--
This message was scanned and is believed to be clean.
Click here to report this message as spam.