From: chris@yeahmon.net
CC: app_rpt-users@ohnosec.org
Date: Sat, 19 Apr 2014 23:56:40 +0000
Subject: Re: [App_rpt-users] code 1
Russ,
Once it boots up login and type the command
# service asterisk stop
Then read the log file
# nano /var/log/asterisk/messages
You will have to scroll to the bottom of the file to find out the problem.
Usually I run the following sequence of commands
# service asterisk stop
# rm -Rf /var/log/asterisk/messages
# service asterisk start
Let it run until you get the error then:
# service asterisk stop
# nano /var/log/asterisk/messages
--
Regards,
Chris Andrist, KC7WSU
Howdy Folks,
My allstar box has been down for a few months due to not having
Internet connection. I got internet back finally and I just fired it up
my allstar box today it has my node 29332 and 29265 in it. once it
boots up, I get
Asterisk end with exit status 1
Asterisk died with code 1
Automatically restarting Asterisk
mpg123: no process killed
that will keep repeating over and over until I shut the machine off.
can someone tell me why this is doing this. the system was running fine
before the internet was lost
73 Russ WL7LP
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.