---------- Forwarded message ----------
From: Loren Tedford <lorentedford@gmail.com>
Date: Wed, Aug 12, 2015 at 6:15 PM
Subject: Re: [App_rpt-users] Is there a way to convert digital to analog?
To: Sione Ragle <ke6sth@ke6sth.ampr.org>


This here is an audio sample of what came across the repeater today.

Im not sure what type of mode this is..
http://hub.kc9zhv.com/audio/41715/20150812161839.WAV


On Wed, Aug 12, 2015 at 6:01 PM, Sione Ragle <ke6sth@ke6sth.ampr.org> wrote:

Does this happen often? I some times have their APRS turned on VFO they the switch to a repeater which some times cause the packet burst to go over the repeater.

There is a web site that has audio samples of all sorts of digital modes http://www.kb9ukd.com/digital/

That could help you identify what kind of digital noise you heard.


On 8/12/2015 3:50 PM, Loren Tedford wrote:
not sure which version of digital it was but they passed it through the system and i have no idea what anyone said.

And Im the repeater owner lol..


On Wed, Aug 12, 2015 at 5:37 PM, Sione Ragle <ke6sth@ke6sth.ampr.org> wrote:
What digital mode is it being pass through? I can see this happening with AX.25 when someone has PL set, but for digital voice they don't use PL so if your repeater is using PL digital voice should not be passed thru the repeater.


On 8/12/2015 2:24 PM, Loren Tedford wrote:
Lets say some one uses my analog repeater in digital mode is there a way to convert that to analog so that the digital does not go out over the air also I was wondering if it was possible to block such transmissions make asterisk ignore digital type audio..


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.