Did you try txlimonly=yes ?
--
Bob Poff
Loganville, Pa
Thursday, 14 May 2015, 06:37PM -04:00 from pete M <petem001@hotmail.com>:
Got 2 repeater linked together at the same site
One msf5000 UHF one tkr750 VHF
If I listen to the UHF repeater the audio is nice and have low and high sound (in the limit of 3hz of course)
No mather if the receiving repeater is the VHF or UHF. I even asked a friend to switch from VHF to UHF on his radio and I could not detect wich was the source beside from the courtasy tone and the end if his TX.
But on the VHF side the audio is High pitch no bass..
here is my config in usbsound.conf for the TKR750
[usb28739] ; VHF
hdwtype=0
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=103.5
rxctcssfreqs=103.5
txctcssfreqs=103.5
;rxctcssoverride=0
carrierfrom=usbinvert
ctcssfrom=dsp
rxdemod=flat
txprelim=no
txlimonly=no
txtoctype=notone
txmixa=voice
txmixb=tone
invertptt=0
duplex=1
rxondelay=1
rxnoisefiltype=0
eeprom=0
Is there a something obvious that I miss?
Thanks..
Pierre
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.