From the CLI, make sure you have correct CM108 fob selected (if more than one is hooked up) and run CLI> "radio tune rxnoise" without the quotation marks, with the receiver sending discriminator audio to the fob, and you should be seeing around 28000 as the level coming in. Call me if you need more help. You already have my number.
N5ZUA
On 3/1/2015 9:23 PM, Skyler F wrote:
amsatnet.info <http://amsatnet.info>I made the modification to the startech CM108 sound fob. This is for a second node on the same machine. Everything should be working, the node is transmitting with audio and PTT is activating properly.
The receive should be working too, I plugged it in to my macbook and was able to hear the white noise just fine and I could hear my voice when I keyed up.
I also had Jeremy W0JRL help with everything on the software, and we tried about everything from Flat audio to speaker audio to COR to CTCSS but still no receive audio coming through the network, it isn't detecting anything when I am transmitting from my node radio to the node.
I was on the phone with him for almost two hours trying anything we could think of, I did anything hardware, and he modified anything software, but we still got no audio through the network. We even turned off the squelch and there was a dead carrier through the network.
Is there something wrong compatibility wise with this fob? I did everything in the instructions and I got it from here http://www.newegg.com/Product/Product.aspx?Item=N82E16829128002.
I used this instruction manual
http://www.repeater-builder.com/projects/fob/USB-Fob-Construction.pdf
If this is a compatibility issue, it is sure a weird one because the Txaudio worked fine.
Is there a way to tell if any audio at all is coming in to AllStar?
What can I try next to troubleshoot?
73
Skyler KDØWHB
--
Skyler Fennell
KDØWHB
electricity440@gmail.com <mailto:electricity440@gmail.com>
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.