Tim was referring to GPIO on the CM1xx.
That being said, Mike and I are starting to talk about GPIO on the RPi2

73, Steve N4IRS

On 10/30/2015 12:08 PM, K Yoksh wrote:

I'm looking forward to using my Pi nodes with GPIO for PTT/COS, but I thought GPIO wasn't supported until the next release?

73

Kyle
K0KN
Olathe, KS

--- Original Message ---

Date: Thu, 29 Oct 2015 10:25:28 -0700
From: Tim Sawyer <tisawyer at gmail.com>
To: Steve N4IRS <szingman at msgstor.com>
Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] DIAL simpleusb
Message-ID:
<CAG3ht9uW80TNGu9BGZghqGg3FozagJ_dmrwJFA3Ygo5XjzmhAg at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Working fine including GPIO.

On Thursday, October 29, 2015, Steve N4IRS <szingman at msgstor.com> wrote:

> Yes, > No errors reported. > > > Has anyone tested the simpleusb driver with the RPi2 version of DIAL? > > -- 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.