What distro are you running, ACID, LIMEY or something else?

K0JSC

From: Corey Dean [mailto:n3fe@repeater.net]
Sent: Friday, July 20, 2012 2:15 PM
To: Corey Dean; Ryan Collier; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Simpleusb problem....

Wow, forget I even sent that last email… LONG DAY!

Corey N3FE

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Corey Dean
Sent: Friday, July 20, 2012 4:11 PM
To: Ryan Collier; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Simpleusb problem....

What is in your usbradio.conf file. You showed the tune file, but not the usbradio.conf file.

Corey N3FE

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Ryan Collier
Sent: Friday, July 20, 2012 12:41 AM
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Simpleusb problem....

Greetings,

A few guys have been trying to help me but thought I would post to see if I get something different. No one can answer this problem.

I can not adjust the setting on my fob with simpleusb-tune-menu

here is simpleusb.conf

[usb27539]

hdwtype=0

rxboost=0

txboost=0

carrierfrom=usbinvert

ctcssfrom=no

txmixa=no

txmixb=no

invertptt=0

duplex=1

rxondelay=0

eeprom=0

here is simpleusb_tune_usb27539.conf

[usb27539]

; name=usb27539

; devicenum=1

devstr=4-2

rxmixerset=200

txmixaset=0

txmixbset=0

notice everything on the tx side is set to 0. I still get audio. If I put it on 999 it still sounds the same. I can also try and change the rx audio and it does move either. If I change to usbradio, it is opposite. I can not get any audio to go in or out. But cos and ptt works.

Any ideas?

Ryan

--
This message was scanned and is believed to be clean.
Click here to report this message as spam.