From: kk6ecm@gmail.com
To: app_rpt-users@ohnosec.org
Date: Sun, 16 Mar 2014 19:18:01 -0700
Subject: [App_rpt-users] rpt.conf duplex=
The node stanza in rpt.conf does not have a
“duplex=2” statement for our repeater. How is it operating without
“duplex=2” for our full duplex repeater? Also, the operator can
hear his/her final words just after releasing PTT. I’m not sure why it is
working with out “duplex=2” Should I add “duplex=3” so
we don’t hear the last part of our own transmission?
Thanks,
Bob
kk6ecm
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.