Ok, makes sense.  I was looking at your wiring diagram on xcat yahoo group that showed Data and Clock. 

Monty

On Mon, Oct 31, 2011 at 9:17 AM, Tim Sawyer <tim.sawyer@me.com> wrote:

Xcat and app_rpt are using the CI-V protocol. So, it's txd -> rxd and rxd -> txd. No clock and data involved.

--
Tim
:wq

On Oct 30, 2011, at 8:48 PM, Monty wrote:

Data -> txd
Clock -> rxd

or vise versa?

Monty

On Sun, Oct 30, 2011 at 8:55 AM, Tim Sawyer <tim.sawyer@me.com> wrote:

Nothing to it, just rxd and txd.

--
Tim
:wq

On Oct 29, 2011, at 11:36 PM, Monty wrote:

Nice! Thanks Tim.  I just got the Xcat all wired up and I am able to control with the Xcat PC program. Do you have a pinout for how to connect the data lines to the Allstar PC's serial port?

Monty

On Fri, Oct 28, 2011 at 6:49 PM, Tim Sawyer <tim.sawyer@me.com> wrote:

Yes! Here's the applicable settings from the rpt.conf node stanza:

[your node number]
rxchannel = Simpleusb/usb               ; Rx audio/signalling channel
remote = xcat
civaddr = 32
functions = functions-remote
;lconn = PP3=1
;ldisc = PP3=0
memory = memory                         ; Section to hold memory entries (optional)
                                       ; remote=ft897 for Yaesu FT-897 or
                                       ; remote=rbi for Doug Hall RBI1
                                       ; remote=kenwood for Kenwood mobiles such as the TMG707A
                                       ; remote=ic706 for the Icom IC-706
ioport = /dev/ttyS0                     ; Specify port for serial port (optional)
iospeed = 19200
dusbabek = yes                 ; either you need it or you don't

;iobase = 0x378                         ; Specify IO port for parallel port (optional)
authlevel = 2                           ; Remote base authentication level
;; authlevel = 0 : Anyone can use it
;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it
;; authlevel = 2 : Requires log in, asks for it automously
;mars = 0                   ; set=1 for IC-706 w/MARS mods (optional)

remote_inact_timeout=0             ; Inactivity timer for remote base nodes only (set to 0 to disable).
remote_timeout=5400                  ; Session time out for remote base. (set to 0 to disable)


--
Tim
:wq

On Oct 28, 2011, at 2:23 PM, Monty wrote:

> Hello Everyone,
> I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt?  I have 2m and a 10m/6m flavor.  Would the 10m/6m have trouble?
>
> Monty

> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users