Try core set verbose 10 for starters.

Might help.

certainly for DTMF.

Not sure about CTCSS.

Steve

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Lu Vencl
Sent: Friday, July 22, 2011 9:49 AM
To: 'David KE6UPI'
Cc: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] My first node attempt today

Hi David,

This is long fixed now.. Had an error in the USB.conf file, but what I was looking for was some sort of feedback showing DTMF detection, for which I now know I can see from CLI and perhaps a greater verbose value (I use 9)

What would be nice though is COR status, for which I don’t think there is any visual available that I know of.. But then again, I am using DSP now so it really does not matter.

73,

Lu KA4EPS

From: shawpbx@gmail.com [mailto:shawpbx@gmail.com] On Behalf Of David KE6UPI
Sent: Friday, July 22, 2011 9:28 AM
To: Lu Vencl
Cc: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] My first node attempt today

Hey Lu, What command are you trying to use? I don't remember a command to show CTCSS or DTMF. I guess the questions is what are you trying to do?

David

On Sat, Jul 9, 2011 at 7:21 AM, Lu Vencl <vencl@att.net> wrote:

Folks,

Got the first one up, but I can’t seem to get any command to work (unless I use CLI).

Is there a script or method where I can get visual screen stats that shows CTCCS, DTMF decode etc? Similar to IRLP’s read input?

Thanks

KA4EPS

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users