What firmware are you running in the RTCM?

Sounds like you are looking for the "Chuck Squelch" version that has Chuck's bug fixes in it.

See http://wiki.allstarlink.org/wiki/RTCM_Client for more information.

Lee

On Tue, Jan 9, 2018 at 5:22 PM, Kevin Babich <kevin.babich@gmail.com> wrote:

Hello,

 

I have an RTCM operational as a Mix-station in an environment with other RTCM’s in voting configuration.  The Mix-station RSSI does not appear to represent the actual signal level as a very binary 0 or 255 value is displayed, irrespective of signal level.

 

I understand a fix for this has been made.  As such, can someone please direct me to the location which I might locate it?

 

Best,

 

KJB

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

--

Lee Woldanski, AScT
VE7FET

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.