Tim,
My goal is to not have IDs encoded with a PL tone.
I need to trigger an output pin on the URI to do so using SimpleUSB to tell the repeater not to send a PL with the current audio.
I hope that is a better explanation.
Robert
N5QM
On Friday, July 26, 2013, Tim Sawyer wrote:
IDs and system messages can be disabled with configuration setting in rpt.conf. But, from your email, it's not clear what you want to do.
--
Tim
:wq
On Jul 26, 2013, at 4:12 PM, Robert Garcia <robert@n5qm.com> wrote:
> All,
>
> I have sifted through the documentation, but I haven't been able to
> find much that directly relates to this.
>
> When using simpleusb as an interface, can you setup one of the I/Os to
> trigger a PL enable or disable input on a radio? The goal would be to
> disable IDs and system messages from being encoded as is normally
> configured on external controllers.
>
> Robert
> N5QM
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users