Mark,
Do you have a duplex radio(s) connected?
Is the COS connected from the receiver to the URI?
Does the receiver hold the COS line low when not receiving a signal?
With carrierfrom=usb the URI sees either either a disconnected receiver or COS high signal as the receiver is receiving a signal.
This would key the transmitter in a duplex configuration.

Yes, chan_usbradio IS supported.
I don't remember carrierfrom=dsp in simpleusb.conf

73, Steve N4IRS



On 10/06/2015 01:08 AM, Mark Johnston wrote:
First off, great work on the new DIAL to replace ACID...

A couple issues I have been having, one after a reboot of the computer - rare I know but always good to test, the transmitter keys up for some odd reason, in duplex=2 

Second issue, /var/lib/asterisk/rpt_extnodes does not show my node 28344... I have it setup on port 4570 and fwd setup correctly - manually setup in rpt.conf the IP/port to my other test server on ACID - and can connect, but can't connect to/from any other nodes.

anyone have an idea what could be going on here? Why does it key up til the timeout time runs out and why is my node not showing up in the rpt_extnodes?

Also is usbradio still supported? Does simpleusb have new features? I ask because the simpleusb.conf originally had 'carrier from=dsp' just thought maybe it supports PL decode or something? 

simpleusb.conf

[general]


[usb28344]


hdwtype=0

rxboost=1

txboost=1

carrierfrom=usb

ctcssfrom=usb

txmixa=voice

txmixb=no

invertptt=0

duplex=1

rxondelay=0

eeprom=0



simpleusb_tune....


[usb28344]

; name=usb28344

; devicenum=1

devstr=3-2:1.0

rxmixerset=500

txmixaset=100

txmixbset=100



rpt.conf

[28344]                                 ; Change this to your assigned node number


rxchannel=Simpleusb/usb28344

duplex=2

erxgain=-3

etxgain=3

;controlstates=controlstates

scheduler=schedule28344

morse=morse28344

macro=macro28344

functions=functions28344

phone_functions=functions28344

link_functions=functions28344

telemetry=telemetry

wait_times=wait-times

context =  radio

callerid = "Repeater" <0000000000>

idrecording = |iKC7DMF

accountcode=RADIO

hangtime=100

althangtime=100

totime=170000

idtime=540000

politeid=3000




73's


Mark KC7DMF



_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic