Mike,

  The phonepatch has a dialtime detting -


dialtime The maximum time to wait between DTMF digits when a telephone number is being dialed. The patch will automatically disconnect if this time is exceeded. The value is specified in milliseconds.

I am confused what you are wanting to do. You mentioned iaxrpt - that has nothing to do with phone patch it has built-in and apparently unchangeable digit sending timing which is fairly short but that is interdigit timing. If you send a long string it will pass it. If you want to send a long string why not automate it so it sends fast.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: mike@midnighteng.com
To: app_rpt-users@ohnosec.org
Date: Wed, 19 Feb 2014 11:40:48 -0700
Subject: Re: [App_rpt-users] Phone Patch DTMF Time to Dial ?


Well, Thanks for that but "I wonder if the parameters are in milliseconds or seconds"?

Problem is from using iaxRPT to test what I was doing.

It sends a string after a completed dtmf entry.

Before I could finish entering the string in iaxRPT -autopach dialtime was timing out from the lack of 1st digit not yet received because the program is sending it as iax data in a string.

I don't have it in front of me know but it might change things if I were not sending it as iax through the program as a direct entry but engaging the tx and sending. I'll try that one tonight. I guess it's dependant on the iaxRPT program. It's not a problem on radio side.

...mike/kb8jnm


-------- Original Message --------
Subject: Re: [App_rpt-users] Phone Patch DTMF Time to Dial ?
From: Andrew Sylthe <asylthe@kc9ona.com>
Date: Wed, February 19, 2014 12:43 pm
To: "mike@midnighteng.com" <mike@midnighteng.com>
Cc: app_rpt-users@ohnosec.org

Hello Mike,

I found the following app_rpt Autopatch howto:

There appears to be a dialtime= setting that allows you to specify time allowed between DTMF digits.  I'm not sure if that's what you're looking for or not.  I would have to see your asterisk dialplan / configuration to help diagnose further.



On Wed, Feb 19, 2014 at 9:15 AM, <mike@midnighteng.com> wrote:


Hello All,

I am looking for the timer/setting for the length of time I have to enter a DTMF string while conducting a phone patch. I keep getting cut off because of the pre-dial string I have selecting the external PBX and trunk of the outgoing line (many digits total).

It seems to be less than 4 seconds.

Got any experience with this one?

...mike/kb8jnm

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



--
Andrew Sylthe
KC9ONA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.