if it's just a hub, rxchannel at the top of the node stanza should be, instead of a usbxxxxx entry, either zap/pseudo or dahdi/pseudo, otherwise it will be looking for a high or low rxpression of the signal, and finding neither, will go into a hang state...if you use the pseudo channel, it won't look for the hardware interface and just push packets rather than try and decode signals.

at least that's how I've set mine up.
--

Bryan

Sent from my iPhone 6S...No electrons were harmed in the sending of this message.

On Jan 10, 2016, at 14:59, Tower DIVA <tower.diva@gmail.com> wrote:

Question all,

What would cause a HUB setup with no USB radio hardware hooked up go into constant timeout and Transmit? I got the info off of status of allstar node 41269. It also will not allow connections to happen and i confirmed port forwarding. Ideas?
Keri KB0YNA

Mrs. Keri Varela

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.