Same thing here... I don't have a basement so therefore, not the luxury of separation by distance.
I can run 100w on 40m and not bother it. Turning the amp on kills it. Any power on 75m and the little URI throws its hands in the air in a suggested moment of surrender.
I did find you only need to unplug and replug the USB line to reset it.
Chuck Henderson <rpt2@chuck.midlandsnetworking.com> wrote:
I had to restart asterisk after I got this message and my DMK went batty keying the transmitter at some crazy rate sounding like CW.
Dec 23 22:07:13 WA3DSP_Allstar kernel: hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
Curious about the EMI? because I was operating 75 meters phone 600 watts at the time this happened. The server and USB to DMK cable are in the basement well away from the antenna so I don't know if it is a coincidence or not. Anyone else ever seen this? Does the EMI in the message mean electromagnetic interference?
73 Doug
WA3DSP
http://www.crompton.com/hamradio
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users